A Warm Welcome to all my visitors.
Thank you for taking the time to come and look at my blog, I really appreciate it. Please leave me a comment, even just to say Hi, It means I can come and visit you, and find new friends!
All my designs are original, so copyrighted to me. If they have been inspired by someone else, I have credited them in the info. Please feel free to use my designs, I just ask that you provide a link back to my blog, Thanks.
Wednesday, 23 April 2014
Monday, 21 April 2014
I put the mask back in place to begin the sponging- I wanted the colour to reflect in the water, but not be visible through the mountains.
I started with Mustard Seed again, but this time I was a little more free-form in how I added it, not just in straight lines.
After the Mustard Seed came Adirondack Citrus, followed by Sailboat Blue.
Finally some Dusty Concord, then the mask was removed from the mountains.
Now I began adding Blues to the water area, Sailboat Blue and Denim Adirondacks.
Latte and Slate were added to the rocks.
To colour the mountains, I dabbed in some Citrus and Mustard Seed lightly, then added Slate over the top, with finally a bit of Latte. A few stars were highlighted with a white gel pen.
I trimmed the edges of the image down, to remove the excess card, matted it onto black, then dark blue card.
I'm also entering this into the Craft a Scene Challenge for April, which is a Mountains and Hills theme.
Adirondacks, Citrus, Sailboat Blue, Denim, Latte and Slate.
Distress Inks Mustard Seed, Dusty Concord.
White gel pen
Lakeside Cove, Rocky Peaks and Star Birth.
The blog owner, Kay, has done a video on there, using the Stampin Up set Lovely as a Tree- here's my pic by pic post with the Stampscapes.
First off, I cut two Nestie shapes, using the 2nd largest die of labels 8.
I also cut two from Classic Scalloped Rectangles, but I haven't used them yet. You can also see the inks I used at the back, the stamps and some sponge pieces.
Taking the lightest colour, here Distress Inks Mustard Seed, swipe lines across the label, the full width.
Swap to your second colour, I used Tumbled Glass, and swipe alongside the yellow. Let them overlap a little so the blue will blend with it in places, making green.
Now bring in a third, darker colour- I used Dusty Concord DI, filling in the spaces, and lightly swiping over the other colours to tone them down a bit.
The stamp I chose for this one is called Lakeside Cove, and I stamped it in Staz-On Black, as I wanted to add some more ink yet, and didn't want to risk Versafine smudging if it wasn't dry enough.
In Kays version, she sponged Dark Blue over the ground area after she'd stamped, so you didn't see the continuation of the streaks. As my image had water in the foreground I just wanted to tone the colours down a little, so they would appear to be reflected in the water.
To do this I used Adirondack Sailboat Blue and Denim sponged over the water area- toning down the colours reflected in the water also had the effect of making the sky seem more vibrant.
Final ink was some Adirondack Mushroom on the rocks- again just to merge the colours in, rather than cover them up.
I repeated the technique on the second label, adding Adirondack Citrus to the mix this time, and using a stamp called Rocky Creek.
Again I used the Blue Adirondacks to tone the colours down in the water, and Latte and Mushroom on the rocks.
I also felt the label size was a bit too big for the image, so cut them both down using the next size down Nestie.
I added some stars in the sky, and reflected in the water, with a white gel pen.
I used the second largest die to cut out some black card to matt them onto. I cut two card blanks to roughly 6" x 5". Two strips of card, one gold, one silver were embossed with Cuttlebug folders, the gold with Diamonds in the Rough, the silver with Forest Branches,and the strip of card added to the card front using DST. I added the image on top with more DST.
Supplies: Dye inkpads in Yellow, blues, brown and purple.
Stampscapes or other scenic stamp
Nesties label die
Embossing folder of choice.
White gel pen.
This was my desk mid- session, lol.
Sunday, 20 April 2014
I decided that I would enter the Visible Image Blog April Challenge, which is Create A Tag, using at least one of their stamps. As you can tell from the title, I used another of my coloured Molly images. Apologies right now for shortage of pictures- I completely forgot whilst I was stamping.
This was the image I used, and I cut her out from the background with a scalpel. After that, I went around the edge of the image with a Black Promarker, to cover the white edges.
Festive Berries was the re-inker used, all the colour variation comes from the misting and water flicking. I stamped over all the tag with Ripped Fishnet, in Black Versafine, then heat embossed it using Crystal Sparkle embossing powder, for a bit of bling. Next I wrapped some black lace around the tag, securing it on the back with double sided tape. Over this I tied a narrow red ribbon into a bow.
The top of the tag had a hole punched, and a red eyelet put in. A skull embellishment was threaded onto some red eyelash wool, and tied through. Molly was mounted on the tag using silicone glue, for dimension.
Here is the tag enlarged, so you can see the Ripped Fishnet detail.
Visible Image stamps, Molly Rules and Ripped Fishnet
Distress Re-inker, Festive Berries
Onyx Black Versafine inkpad
Crystal Sparkle embossing powder, Stampendous Stamp'n'Stuff
Charm- mine came from Riverside Beads, in the Steampunk section.
I went about this a bit backwards, to be honest. I wondered if I could turn her into a triple stamped card, which meant masking her out first.
I worked out the card sizes I needed, stacked them up, then added the Post-it mask. Its simple enough to get the right sizes- each stamping layer is 1" bigger than the previous one.
Normally, I'd cut all the stamping layers first, then cut all the mats, but like I said, I was doing this backwards.
I wanted to add a sentiment, and thought dog-tag style. I cut a piece of thick card a little larger than my stamp, which I covered in Black Soot Distress Ink. This is wet enough to be able to add embossing powder to it, and I used black detail for this. Three layers, and into the final layer I stamped the sentiment, which had first been coated in Silver Pigment ink.
TIP: Make sure you coat the sentiment stamp before you start heating the embossing powder. The pigment ink won't dry on the stamp, but you will want to be able to stamp into the molten powder before it can harden.
For the second part of the tags, I used a lock stamp, from the Max Rocks set. Done exactly the same way as the sentiment. When they had cooled, I coloured the edges and backs with a Black Promarker.
Both tags had a hole punched in one corner and were added together with a length of ball chain, and an eyelet put in the top of the matted panel to thread it through.
If the embossing starts to crack when you punch the hole, a quick blast with the heat gun will fix it. Next time I'll make the holes first!
Molly Rules, Max Rocks and Ink Splat sets, all by Visible Image
Versfaine Onyx Black
Distress Ink Black Soot
Adirondacks (or any dye ink) in a couple of shades of blue.
Silver Pigment inkpad
Black detail embossing powder
Coloured Promarkers to colour Molly
Ball chain & fastener
Dark blue card
Wednesday, 16 April 2014
You can see a mask of Molly on a post-it, for later use, and some colour samples as well.
I'm actually quite chuffed, as I seem to have stumbled upon a colouring method that works for me.
Regulars will know I frequently moan that my colouring skills are less than desirable- blending and shading have managed to elude me entirely. However, quite by fluke, I seem to have blundered into a solution. After I had coloured the purple Molly, below, I was as usual less than impressed. It still seemed 'flat', and I wanted to give her hair in particular, some texture. So I added one of the ultra fine nibs to my black Promarker, and flicked in a lot of short lines.Which I then coloured over in a dark grey.It wasn't perfect, but I did find that amount of colour was blendable. So I switched to using ultra fine nibs on all the colours I was using- and by putting down loads of fine lines, in two colours, then blending over the top with a third really pale one, I got what I wanted. Talk about a Eureka moment!These images have to be my first colouring attempts I'm actually pleased with, and that look pretty much like the version in my head- ( you don't want to go there, its a dark & scary place!). So much so, I think I'll be stamping up a few more, and I can see me colouring just for fun now. I've also just ordered a bunch more ultra fine nibs- so I can have one for each colour group, dark and pale.
So apart from this, what else did I discover? Well, I mentioned in last weeks post about how the black inks took to different card, and Julia also commented about how different all the 'white' card looked next to each other. Which they did, its true.
Some had been stamped in Versafine, some in Memento, and a few had been stamped in Versafine & heat embossed.Results? The images were all left for a few days before I tried colouring- and I had issues with the Memento bleeding, surprisingly.
Not sure if that was because I was using the bullet point nib, and I will be testing it out with the ultra fine nib to see if that solves it. It may also be down to colour, as I find the reds tend to spread alarmingly. The heat embossed lines seems to cure that though.
Although it wasn't just the reds, I had a problem with the purple in this Memento image.
One epic fail was the Clarity Silk Coated card- that and Promarkers do not play well together. The image was heat embossed, but it was as though the next colour added 'lifted' the first one, rather than blended with it, leaving the blue in the image looking very streaky and also the black dried out looking very flat.
So thats my desk, go on- show us yours! Have a good week folks, and hopefully a lovely Bank Holiday weekend too.
Wednesday, 9 April 2014
What is on my desk this week, is the Ink Palettes I bought, now complete with all the alcohol inks I have. A few missing, about 8 I think.
I had seen Tim say there were labels on the Ranger site, but when I went there I couldn't find them, so did my own. They look like little butterflies, which is ace, they are actually punched from sticky labels with a 4 leaf clover punch, I just cut the stem off, then coloured them with the appropriate ink off a cotton bud.The ones in the closed palette , on the far right side, are not Tim Alcohol inks, they are by Zig, and if I remember rightly, I bought them from Jenny, The Artistic Stamper. Funny thing though, yesterday on FB there was a post by Tim with a link to all the labels for his product lines. Organise your Ranger Products- this is the link if anyone wants it. They are colour coded labels for all the inks/inkpads etc. Just print off onto a sheet of sticky labels- I have some A4 sheets divided into 4 labels I got from Staples which are perfect- and stick them on. I also did some little circle ones that I put on top of each ink bottle, to make finding them easier.
Wednesday, 2 April 2014
I do my post up on Tuesday afternoon, and schedule it, because we work nights, and getting in at 6.30ish on Wednesday morning, I'm just about capable of linking in with our head Desker, Julia, at The Stamping Ground, typing up a post would be beyond me, lol. And my desk won't change overnight, unless the fairies get to it.
Speaking of ordering stuff, I have a few times complained that I could not find refills for my Adirondack pads in this country. You can order them from the USA, but the shipping (and what you would probably get charged for Import duty) is ridiculous. That happened to Beloved Hubby last week. He wanted a rugged case for his new phone, not available over here, only from USA. Card off the post office through the door- Import Duty of almost £3, which wasn't bad, BUT, the Post Office also charged £8 for ' Handling Costs' related to the Import Tax! Total cost £11- how can they justify that? So I try not to order too much from the USA cost wise, just because of that Handling Charge. Anyway, back to what I was about to say-the site I found my palette and pen on, Country View Crafts, well, I was browsing, as you do, and what did I find? Adirondack pad refills! She must be the only place in the country that carries them. And, best of all, she has free shipping, with no minimum spend, which is always good, its quick too, my order turned up in a couple of days. So I shall be gradually getting refills for all my pads, some of them I've had for a few years now, and could do with a refresh.Final pic, and I had to put it at the bottom, so the pic doesn't show on FB, with RSS feed, is a Wedding Card for some friends getting married in a weeks time.